Raspbian Wheezy

Wheezy armel image

Features include:

• A minimal Raspbian Wheezy installation (similar to a netinstall)
• Hard Float binaries: floating point operations are done in hardware instead of software emulation, that means higher performances
• Disabled incremental updates, means apt-get update is much faster
• Workaround for a kernel bug which hangs the Raspberry Pi under heavy network/disk loads
• 3.6.11+ hardfp kernel with latest raspberry pi patches
• Latest version of the firmwares
• Fits 1GB SD cards
• A very tiny 118MB image: even with a 2GB SD there is a lot of free space
• ssh starts by default
• The clock is automatically updated using ntp
• IPv6 support
• Just 14MB of ram usage after the boot

Here is the link to download my custom image:

http://files2.linuxsystems.it/raspbian_wheezy_20130923.img.7z – London, UK

Checksum MD5: e5b0d40f47a1fc2e4c2b80c99af538be

dd bs=1M if=raspbian_wheezy_20130923.img of=/dev/sdX

Finally, if you have an sd larger than 1GB, grow the partition with gparted (first move the swap partition at the end).

The root password is raspberry.

You will have to reconfigure your timezone after the first boot:

dpkg-reconfigure tzdata

The keyboard layout:

dpkg-reconfigure console-data

And the localization:

dpkg-reconfigure locales

Original Post:

https://www.linuxsystems.it/raspbian-wheezy-armhf-raspberry-pi-minimal-image/